RFloXa wider dropped crown triple clamp for Hawk31 Max forks has been developed based on data from the following models:
Talaria Sting MX3 / MX4 / MX5
Surron Light Bee
Eride Pro
About non-standard front wheel sets Due to the data of this kit referencing the above models, all non-standard front wheel hubs or modified hubs with non-factory data may not be an exact match. If you are using a non-Surron or Talaria standard wheelset, it is recommended that you add some spacers to ensure that your aftermarket wheelset is centered.
About Disc Modifications If you are using a non-stock disc, you can adapt it in the following ways:
Replacing Spacers: Adjust the distance between the disc and caliper with the proper spacer to match your aftermarket wheelset.
Grinding the spacer: Lightly grind our spacer to make the disc fit the installation more accurately and ensure the stability and safety of the braking system.
⚠️Caution:
Please check the axle alignment of the wheelset and fork before installation to avoid any deviation affecting the handling. Please ensure safety when adjusting the spacer to avoid the brake system failure due to improper adjustment. If you need a larger disc, please check the compatibility of the fork and adapt the corresponding caliper bracket.
I’ve bought several parts and somehow they arrive in the USA almost as fast as a local supply. Parts are amazing, customer support is great and the shipping is quick
Great feeling, taller front forks give it so much more movement. Its way more plush over rough stuff and handles landings so much better than stock. Easily the best upgrade I've done to my MX5, would buy again.
